How to clean motherboard

How to clean motherboard. Just like we clean our house or car or change the oil later, the computer also needs some maintenance so that it stays in good condition for as long as possible, and of course, the PC works well. Cleaning up is a chore that even though it’s hard and nobody likes to do, it’s still necessary from time to time. It is as important as finding the best motherboard for Ryzen 5 3600x and Ryzen 9 5900x. In this article, we are going to tell you all about what you should do and how to do the easiest and most secure way to completely clean and disinfect the inside of your computer.  You may be curious about how to overclock the Ryzen 1600.

To tell you whether PSU is dead or not. The interior of the PC should be cleaned from time to time, but the cleaning that we all do from time to time we can say that it is “up” and not a complete cleaning, and that is to clean your computer completely. The first thing you should know is that you have to disconnect every last cable, so that you can access all the corners of the interior and, after all, you have to clean the components yourself.  Then you must know how to install the Ryzen CPU.

To clean the motherboard, you will need to disassemble all components.

And when we say it all, it means everyone. If you really want to clean your computer thoroughly, you have to remove all the components one by one (we have a guide to making a PC that you can follow to disassemble it) ), And this includes removing the motherboard. It is able to clean the front and back as well as the metal plate on which it is mounted.

It is very important that you remove all the fans and indeed the heat sink from the case so that you can take advantage and replace the thermal paste. The thing about fans is that they are the components that move the air in and out of the box and that is why they are the components that collect the most dust as a rule. Similarly, it may be a good idea to disconnect all cables to clean them, as they can also accumulate dust and dirt, although this can be difficult.

How to clean a motherboard and all its components.

There are many people who think that hitting the compressed air spray (or even vacuum cleaner) inside the PC is already clean, but there is nothing beyond reality: doing so will only make your move. Dirt from one place to another. Yes, we are going to recommend the use of compressed air in some of the steps of this guide, but only for specific things, and in fact, if possible we recommend taking it out (since the dirt will come out and your Will spread in the interior of the house.

Clean the PC case.

We assume that you have already separated all components and are going to clean the PC case, which should only be with the chassis and sides removed at this point. Our recommendation here is that you use a microfiber cloth with a little cleaning product (which can be a very dust remover) to clean both sides thoroughly, a sharp tool (such as a screwdriver if needed) Always cover with a rag from the driver and help you. Difficult to get into corners.

As far as cleaning the rest of the box is concerned, the easiest thing to do now is to use compressed air spray, always on the outside, to remove most of the dirt, and then the way you did with the side cover. Clean everything inside. And pay special attention to the outer grid with the fabric, because this is where the most dirt accumulates.

How to clean motherboard
How to clean motherboard

If your home is one of the many corners and cranes that are difficult to reach, there is an alternative solution that, although we do not recommend doing so, can be quite effective. This solution literally consists of separating or sealing the connection panel with insulating tape (necessary) and placing the box under the shower, removing all the dirt from the water. Then it is important to dry everything immediately with the help of kitchen paper or a similar hairdryer. It’s quite radical and can damage your box (especially the connection panel), but it’s also effective. In any case, we reiterate that we do not recommend doing so.

Clean the heatsink or radiator.

Depending on the type of heat sink you have, cleaning may be easier or more difficult. If you have a heat sink tower or double tower type air cooler, it is quite easy to clean because after literally disassembling it you can put it under the faucet and then dry it with kitchen paper and dryer. can. There is no risk of anything being damaged by water because heat sinks have an anti-corrosion coating, and will not rust if you dry them immediately.

If the heat sink is of the shell type, you can do it this way too, but make sure to separate the fan first, of course, because it will be damaged if it gets wet. In any case, you also have the option to clean it gently and carefully with a microfiber cloth so as not to bend any of the aluminum wings, if you initially use compressed air to remove most of the dirt. Want to help you with the spray.

Beware of power supply and motherboard

Once again we are faced with components that are very delicate. With Power Supply we do not recommend that you open it for cleaning unless it is extremely dirty, and nevertheless, we advise you to be very careful and use a microfiber cloth which is Isopropyl alcohol, not compressed air. With similar motherboards, do not use compressed air so that you do not damage anything, and use a cloth and isopropyl alcohol for cleaning instead.

Clean the motherboard with a brush.

For the motherboard, you can help yourself with a soft hairbrush to remove most of the dirt for the first time, especially some useful for cleaning PCIe sockets, RAM memory, and connections.

Hard drives, SSDs and other devices

To clean mechanical hard drives and SSDs in the form of 2.5 inches, you first need to clean only with a brush and then with a microfiber cloth with our great friend to leave them like gold planes. Now, if you have SSDs in M.2 format, you should disassemble them and we recommend that you just hit them with a cloth to avoid possible damage. There is not much to add here, this component is not difficult.

Take advantage and turn the thermal paste into a heat sink.

Now that you have everything clean and tidy, you will need to reconnect the heat sink so that you have no choice but to replace the existing thermal paste. On this site, you have a tutorial on how to do this, but if you do not have the practice, we suggest you keep the assembly instructions for your heat sink in hand.

Thermal paste

It is always a good idea to have a tube of thermal paste at home (since it is recommended to replace it every 6 months or a year) and they are not too expensive.

Conclusion: How to clean motherboard

Now that you’ve cleaned up all the components individually, it’s time to reassemble everything, and we’ve already linked a guide for you at the beginning of this article. Simply, when you assemble, we advise you to pay attention, because all the components are going through your hands again, they are completely clean, otherwise, you can go over them again before assembling them. Are

Additional Materials:

How to fix bent pins on the motherboard

How to ship a motherboard

What does a better motherboard do?

How to connect led strip to motherboard

Spread the love

Usman Haider
Usman is a writing author who focuses on making well-researched content. With a keen eye for detail and a gift for locating the foremost attention-grabbing stories to share, he is devoted to crafting articles that educate and entertain her readers. Whether or not he’s writing concerning the newest fashion trends or sharing recommendations on beginning a little business, her goal is usually to tell and encourage her audience. With her distinctive voice and interesting style, he could be a rising star in online writing.
Please add "Disqus Shortname" in Customize > Post Settings > Disqus Shortname to enable disqus or remove '#' to disable comment section