How to jump-start a motherboard

Not infrequently, you may find yourself in a position where the power button on the computer box is broken and will not switch on the computer, no matter how hard you press the button. For those who find themselves in this situation (for example, if their PC has been configured to operate “on the air” to allow for boxless testing), we’ll show you how to start your PC without pressing any buttons in this post. The power switch (sometimes known as the on/off switch).

In reality, there is a multitude of reasons why you would want to start your computer without touching the power button on the keyboard. Obviously, two of the most significant are (that it’s broken and won’t operate) and (that you threw the computer into the air for no apparent reason), but there are plenty others. Yes, it’s similar to being able to boot up a computer from a remote location. The situation in which you don’t have entry to your home

Knowing how to start a computer without pressing a button can’t hurt, right? After all, even for “science,” knowing how to start a computer without pressing a button can’t hurt, can it? The current and safe strategies for turning on your computer without pressing the power button on the box will be discussed in detail in the following section of the article.

Instructions on how to boot your computer without using the power button.

The first option is also the most straightforward and straightforward of the three. If you have one of these keyboards, all you have to do is push the button on the motherboard, which is located towards the top. Many current Motherboards, particularly those near the top, contain power and, in some cases, a reset button. The computer will only boot if this is done) and only if this is done). (Take care not to get any other components wet or dirty)

In that case, there’s no need to mess with the creases; simply press the button and walk away from the issue. In most cases, as you can see in the image above, this button is red and is positioned on the right side or bottom of the RAM memory socket, respectively. Occurs. The motherboard is on the edge of failure.

  • It is not recommended to use the second approach unless you have a pressing need to restart your computer, in which case you should. This procedure involves shortening the motherboard PIN in order to compel the computer to boot. Do not use the word “short circuit” because there is nothing wrong with it and no danger if done correctly, as we will be only connecting the power pins on the motherboard to each other, which is completely harmless.
  • It is necessary to have a flat screwdriver with a plastic handle (though it goes without saying that the handle is important), as well as the motherboard’s connecting panel, which is where the box wires are connected. Find out where the power switch connector (POWER SW, PWR SW, or PWSW) attaches to the motherboard, which is usually in the bottom right corner of the motherboard’s case.
  • When the PC is turned on, these pins are normally connected to the POWER SW cable of the box, because this is the cable that links to the box’s power button, and it is this connection that allows us to turn on our computer. If there is a cable attached, unhook it and then use a screwdriver (preferably flat) to tap both pins at the same time to release the connection. You may now remove the screwdriver from the computer, and it will begin to boot up automatically.

Learn how to boot a motherboard without the use of a tower.

Many motherboards feature buttons that allow you to turn on and restart your computer without having to put it in a chassis, but these motherboards are in the minority, therefore the majority of users will have to rely on a very easy method to accomplish their goal. There’s nothing special about the power button on the PC’s chassis; it’s merely a circuit on the motherboard that closes a circuit to allow current to pass and the PC to boot. This means that we may create a jumper right on the motherboard to allow the computer to boot up immediately.

There are two pins on all motherboards that are labeled “PWR,” and these are the two pins that must be jumped in order to start the computer (do it briefly), as we discussed above. It is completed by pressing the power button on the tower. For those of us who do not have a computer placed on the tower, we can remove these two pins with the use of a clip or a screwdriver.

All we have to do is join the two pins together with the clip, and the computer will start up as if we had clicked the tower button directly on the keyboard.


In this post, we’ve shown you numerous methods for starting your computer without pressing the power button; but, if none of them work, you can use them as an emergency measure, as we indicated at the beginning of the article. It’s called “science” because, as you’ll see, these ways are far from ideal, and there isn’t much of a button for it.

Consequently, if you’re following this guide because the power button on your box is broken, we urge that you make it a habit of not turning on the computer using these various methods and instead of repairing the button. You can either invent a change that doesn’t work or implement a change that doesn’t work well. Make an effort to bring it back to life. PC as a whole is referred to as Preventing problems and, more crucially, accidents is the most effective means of avoiding them. Unless you are successful in contacting the manufacturer and requesting a replacement, you will be forced to replace the power button and the entire power box.

Spread the love

Usman Haider
Usman is a writing author who focuses on making well-researched content. With a keen eye for detail and a gift for locating the foremost attention-grabbing stories to share, he is devoted to crafting articles that educate and entertain her readers. Whether or not he’s writing concerning the newest fashion trends or sharing recommendations on beginning a little business, her goal is usually to tell and encourage her audience. With her distinctive voice and interesting style, he could be a rising star in online writing.
Please add "Disqus Shortname" in Customize > Post Settings > Disqus Shortname to enable disqus or remove '#' to disable comment section